Bounty Hunter Tracker II Manual do Utilizador descarregar pdf (Página 6)

TONE DISCRIMINATION classifies detected metal objects

into a low or high tone category.

DISCRIMINATE

LOW HIGH

Adjust the DISCRIMINATE control

higher to increase the range of

the low tone. It is possible to set

the DISCRIMINATE level so that

nickels have a low tone, larger

coins have a high tone and pull

tabs have an in-between “broken”

tone, making them easily recog-

nizable.

Sensitivity will be slightly reduced when using either the DISC

or TONE Discriminator.

With the Mode Switch you can go from DISC or TONE to ALL

METAL, and back again, without changing the Discriminate

level.

GROUND CONTROL: The Tracker III automatic Ground Trac

feature allows operation in virtually any mineralization of

ground with full power.

Use it effectively on the beach or for gold prospecting. In the

ALL METAL Mode, the Tracker III will detect gold nuggets thru

black sand! Finds relics in all types of soil, deeply and with

ease.

TO OPERATE

Turn the “On-Off/Sensitivity” control to ON. NOTE: The

detector is normally silent when operating until the coil

passes over a metallic object.

When first turned on, Sensitivity will be at its lower setting.

Turning the control toward “HIGH” increases sensitivity. If

the unit “chatters” , reduce the sensitivity slightly, until the

chatter stops.

For maximum performance, operate with the sensitivity as

high as possible. The sensitivity can generally be set higher

when the Discriminator is on.

SENSITIVITY

OFF HIGH

OPERATION

RESPONSE

LOW

TONE

BROKEN

TONE

HIGH

TONE

Copper, Silver &

Brass

Old & New

Pull Tabs

Gold & NickelIron & Steel

1 2 3 4 5 6

Comentários a estes Manuais

Sem comentários

Bounty Hunter Tracker II Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Bounty Hunter Tracker II